carbide orifice plate for spray dry nozzle accessories
Features of Tungsten carbide orifice plate for spray dry nozzle accessories
Tungsten carbide nozzle is made from hot pressing with straight bore and venture bore type, which have high hardness, good wear resistance, high anti-corrosion ability. Usually they offers a long life with high performance.
Application Tungsten carbide orifice plate for spray dry nozzle accessories :
They are widely used in abrasive water jet, dry/wet blasting,suction blast,scrubber,descaling,slurry jet,centrifuge and so on.
We are a coveted firm, indulged in offering a conglomerate of Spray Drying Nozzles, Spray Dryer Wear Parts, Rotary Dryer Nozzles and other Tungsten Carbide wear parts. Developed in tandem with the quality guidelines laid down by the industry, our products can be availed by the clients in varied sizes, shapes, grades and specifications as per the needs. Our portfolio encompasses following cited products.
TC Orifice nozzle
TC Swirl Chamber
TC End Plates
TC Swirl Chamber - EP Combined
TC 3 Way Swirl Chamber
TC 4 Way Swirl Chamber
TC Atomizer Nozzles
Grade reference:
Grade | Performance | Performance&application recommended |
Density G/cm 3 | Bend Strength N/mm 2 | Hardness HRA |
YG3 | 14.9-15.3 | ≥1180 | ≥90.5 | Sand-blasting nozzles qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting n |
YG3X | 15.1-15.4 | ≥1300 | ≥91.5 |
YK05 | 14.95 | 2500 | 90.5 | Mostly used as the buttons of small and bits medium sized percussion |
YG8C | 14.8 | 2400 | 88.5 | and as the inserts of rotary prospecting bits to cut soft and |
medium hard formations. |
YG6 | 14.95 | 1900 | 90.5 | For coring crowns,electric coal drill bits, coal cutting picks,oil |
cone bits and scraping knife bits,used in coal geological prospecting, |
mining and oil well boring. |
YG6X | 14.8-15.1 | ≥1560 | ≥91.0 | Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. |
YG6A | 14.7-15.1 | ≥1580 | ≥91.0 |
YG6 | 14.7-15.1 | ≥1670 | ≥89.5 | Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. |
YG8 | 14.6-14.9 | ≥1840 | ≥89 | Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. |
Grade reference:
Hot tags: Tc Swirl Chamber plate, carbide circular tips, Nozzle 1 Fyrtex for Spray Drying, TC Orifice nozzle, tungsten carbide Swirl Chamber, TC End Plates, TC Swirl Chamber, cemented carbide tile cutter, EP Combined, TC Atomizer Nozzles, China, Customized, buy, high quality, manufacturers, suppliers, free sample, factory, made in China
